
Flow-through Rotary Valve
For negative-pressure systems under cyclones and dust collectors — detached casting, outboard alloy bearings, easy dismantling.
Learn moreThe BFCP blow-through rotary airlock valve is used in dilute-density pneumatic conveying and can be installed directly in the conveying pipeline.
Air inlet and discharge outlet sit at the lower part of the housing end cover. Pressurised air enters from one side, passes straight through the rotor's V-shaped chambers, mixes with material and carries it into the conveying line. This design lets the airflow clean and convey residual powder from the chambers, while the compact layout makes on-site installation easy.
| Body material | Cast iron / 304 / 316L stainless steel |
|---|---|
| Nominal bore | DN150 – DN300 |
| Capacity | 1 – 40 t/h |
| Air inlet | DN50 – DN80 |
| Working pressure | Up to 0.1 MPa |
| Working temperature | -20 °C to 180 °C |
| Drive | Gear motor with torque arm |

For negative-pressure systems under cyclones and dust collectors — detached casting, outboard alloy bearings, easy dismantling.
Learn more
Vertical drop-through feeding for gravity-discharged granules — reinforced rotor, outboard bearings and active air sealing.
Learn more
For feeding and discharge in pneumatic conveying and atmospheric systems — robust, quiet, with dual bearing sets for longer life.
Learn more
Small-capacity, high-sanitation dosing — one-piece forged body with anti-blocking, airlock and mirror-polished contact surfaces.
Learn more
Quick-dismantling design for materials that need regular cleaning — compact, reliable fit precision after repeated assembly.
Learn more
Plug diverter valve for switching bulk-material direction in pneumatic lines — pneumatic, electric or manual actuation.
Learn more
Permanent-magnet separation of ferrous contaminants — protects downstream equipment in grain, feed, food and pharmaceutical lines.
Learn more
Synchronous scrapers forcibly clear material sticking in the rotor chambers — for sticky, low-fluidity bulk solids.
Learn more