Payment & Shipping Terms:
|Use Environment：:||≤ -30 ° C Or ≥ 60-30 ° C||Material::||Steel Or Die-cast Aluminum Alloy|
|Color::||According To Clients' Requirement||Layout Form::||Coaxial|
|Tooth Surface Hardness::||Hard Tooth Surface||Input Speed::||1000（rpm）|
Product Name: worm reducer gearbox,Nmrv Worm Gear Reducer with Two-stage scroll control box
Product composition: oil seal, oil plug, worm gear box, ball bearing, output shaft, worm gear, worm, output shaft, motor connecting plate
Product features: light weight, superior strength, beautiful appearance, high heat dissipation performance, long service life, no noise, etc.
Application: Mechanical deceleration device for production process equipment of various industries
|Use environment:||≤ -30 ° C or ≥ 60-30 ° C|
|Product material:||fuselage, die-cast aluminum alloy; worm shaft, 20 Crq steel; worm gear, nickel bronze alloy|
1. The operating environment of the NMRV reducer is lower than -30 °C or higher than 60-30 °C, and the oil seal of special material must be replaced;
2. The motor matched with the NMRV reducer must be suitable for working in a low temperature environment, and the power of the motor must meet the torque requirement at low temperature start;
3. The viscosity of the lubricating oil will be higher before being put into use. The machine should be loaded after no-load test run to avoid equipment failure.
4. When using the NMRV reducer in the first pass, replace the lubricating oil after 150-400 hours of operation, and the cycle of the subsequent oil change reducer is less than or equal to 4000 hours;
5. Regularly check the amount and quality of the oil, keep enough lubricating oil, and replace the oil mixed with impurities or deterioration in time. The operating factor of the NMRV reducer is dependent on the actual operating environment. When choosing the appropriate service factor, factors such as the nature of the load at the output, the time of day-to-day operation, and the frequency of start-up must be considered.
Contact Person: Jack