Payment & Shipping Terms:
|Material:||Cast Iron||Output Torque:||2.6-1195 N.M|
|Rated Power:||0.25-55 KW||Ratio:||9-2800|
|Input Speed:||300-1800 Rpm||Gearing Arrangement:||Planetary|
|Product Name::||Vertical Or Horizontal B/X Series Cycloidal Gear Speed Reducer|
Vertical Or Horizontal Cycloidal Gear Reducer For Industry Agitator Cycloidal Gearbox
Cycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has many advantages, versatile, and can be both positive and negative operation.
All planetary cycloidal reducer rotating device can be divided into three parts:input part,deceleration part and output part.
Dislocation on the input shaft is equipped with a 180℃ of double eccentric sleeve,equipped with two ball bearings on the eccentric sleeve,the formation of H two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway,and by a groud of cycloid gear and pin gear ring of gear meshing,less bad tooth meshing reduction mechanism to form,(in order to reduce friction,in small ratio of speed reducer,the needle with needle teeth on the gear set).
When the input shaft with eccentric sleeve rotation for a week,as a result of the cycloid gear tooth profile curve characteristics and restricted by needle on the gear teeth,the movement of the cycloid gear becoming both revolution and rotation of the plane movement,and input shaft are made for a week,eccentric sleeve also turn the week,cycloid gear in the opposite direction around a big tooth difference reduction is obtained, then with the help pf W output mechanism,the cycloid gear rotates at low speed movement through the pin shaft,passed to the output shaft,low output speed can be achieved.
|Type||Stage||Model||Nominal Power (KW)||Normal Torque NM||Ratio|
|XB series cycloidal reducer||Singel reducer||B09/X1||0.55-0.18||26-50||9-87|
|XB series cycloidal reducer||Singel reducer||B0/X2||1.1-0.18||58-112||9-87|
|XB series cycloidal reducer||Singel reducer||B1/X3||0.55-0.18||117-230||9-87|
|XB series cycloidal reducer||Singel reducer||B2/X4||4-0.55||210-400||9-87|
|XB series cycloidal reducer||Singel reducer||B3/X5||11-0.55||580-1010||9-87|
|XB series cycloidal reducer||Singel reducer||B4/X6X7||11-2.2||580-1670||9-87|
|XB series cycloidal reducer||Singel reducer||B5/X8||18.5-2.2||1191-3075||9-87|
|XB series cycloidal reducer||Singel reducer||B6/X9||15-5.5||5183-5605||9-87|
|XB series cycloidal reducer||Singel reducer||B7/X10||11-45||7643||9-87|
1.Cycloid reducer big reduction ratio, high efficiency: a reduction gear ratio is 9~87, the two-stage reduction gear ratio is 121 ~ 5133, multistage combination can reach tens of thousands, and the needle tooth meshing line type rolling friction, the meshing surface no relative sliding, so a reduction efficiency of 94%.
2.Pin wheel reducer smooth running, low noise: the teeth contact at the same time when in operation, the coincidence degree high, stable running, strong overload capacity, low vibration and noise, a variety of models, small noise.
3. The use of reliable, long life: because the main part is made of high carbon alloy steel quenching (HRC58-62), and then grinding, and cycloid gear and pin gear set mesh transfer to the pin gear form rolling friction pair, friction coefficient is small, so that the meshing zone no relative sliding, wear small, so durable.
4. Compact structure, small volume: compared with other reducer with the power of the above weight, small volume 1/3, as is the planetary transmission, the input shaft and the output shaft in the same axis, in order to obtain the smallest possible size.
Contact Person: janee