Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home About Us

Changzhou speed reducer machine Co., Ltd Quality Control

I was fortunate to visit your company and saw the factory that you are further improving. The production line standard is fast and I hope to cooperate next time.

—— Lily

I'm Online Chat Now
QC Profile

In recent years, the mechanical manufacturing industry has developed rapidly, and the reducer industry has been greatly developed as a branch.

Once the speed reducer has problems in the process of use, it is very affecting the work schedule and safety hazards.

Reducer common faults and solutions

 

1. The sound of the reducer is not normal or there is noise:

Reason: There are many impurities in the lubricating oil; the gear meshing part is damaged, the gear gap is increased, the bearing clearance is large; the bearing is damaged or worn seriously.

Solution: Check the meshing parts and you may need to replace the damaged parts. Adjust the bearing clearance. Replace damaged bearing

2, the bearing temperature is too high:

Cause: The oil level in the gear unit is too low; too little oil, the oil has deteriorated; the bearing is damaged.

Solution: Check the oil level at room temperature and may need to replenish the oil. Check when the last oil change was made and the oil may need to be replaced. Check the bearings and may need to be replaced.

3, oil seal seepage, oil leakage:

Cause: The oil seal is broken.

Solution: Replace the oil seal. Check the shaft seal wear and may need to be replaced

4. The working temperature of the reducer is high:

Cause: The oil level in the reducer is too high or the oil quantity is small, the oil has aged, and the lubricating oil is seriously polluted.

Solution: Check the oil level and you may need to correct the oil level. Increase the Lubricant Check When the last oil change was made, the lubricant may need to be replaced.

5. Tooth surface wear or corrosion:

Cause: The quality of the lubricant is unacceptable or contains impurities.

Solution: Replace the worn gear and change the oil.

6 gear teeth broken:

Reason: Overload work, gear quality problems.

Solution: Replace the parts, recalculate the load and see if the selection is correct.

7. Input shaft break:

Cause: The radial force is too large, the coupling error of the coupling is too large, and the quality is a problem.

Solution: Replace the part. When the user inputs power with a pulley, check whether the radial force exceeds the specified maximum value. Check that the angular error of the coupling installation is out of tolerance.

8. Deceleration chassis cracking:

Cause: The radial force is too large, the teeth are broken, and the quality is a problem.

Solution: When the user uses the chain drive to output power, it is necessary to check the radial force. If the radial force exceeds the specified maximum value, it is recommended that the user use a welded box or an enlarged model.

Certifications
  • Changzhou speed reducer machine Co., Ltd

    Standard:营业执照

    Number:320483000201711170090

    Issue Date:2017-11-17

    Expiry Date:2047-11-17

    Scope/Range:减速机,塑料制品(除医用塑料制品),机械零部件,关风机,阀门的制造,加工,销售;自营和代理各类商品及技术的进出口业务,但国家限定企业经营或禁止进出口的商品及技术除外。(依法须经批准的项目,经相关部门批准后方可开展经营活动)

    Issued By:常州市武进区行政审批局

  • Changzhou speed reducer machine Co., Ltd

    Standard:营业执照2

    Number:320483000201711170090

    Issue Date:2017-11-17

    Expiry Date:2047-11-17

    Scope/Range:减速机,塑料制品(除医用塑料制品),机械零部件,关风机,阀门的制造,加工,销售;自营和代理各类商品及技术的进出口业务,但国家限定企业经营或禁止进出口的商品及技术除外。(依法须经批准的项目,经相关部门批准后方可开展经营活动)

    Issued By:常州市武进区行政审批局

  • Changzhou speed reducer machine Co., Ltd

    Standard:对外贸易经营者备案登记表

    Number:02766708

    Issue Date:2017-11-20

    Expiry Date:2047-11-17

    Scope/Range:减速机,塑料制品(除医用塑料制品),机械零部件,关风机,阀门的制造,加工,销售;自营和代理各类商品及技术的进出口业务,但国家限定企业经营或禁止进出口的商品及技术除外。(依法须经批准的项目,经相关部门批准后方可开展经营活动)

    Issued By:对外贸易经营者备案登记机关

  • Changzhou speed reducer machine Co., Ltd

    Standard:进出口贸易

    Number:320483000201711170090

    Issue Date:2017-11-17

    Expiry Date:2047-11-17

    Scope/Range:减速机,塑料制品(除医用塑料制品),机械零部件,关风机,阀门的制造,加工,销售;自营和代理各类商品及技术的进出口业务,但国家限定企业经营或禁止进出口的商品及技术除外。(依法须经批准的项目,经相关部门批准后方可开展经营活动)

    Issued By:常州市武进区行政审批局

  • Changzhou speed reducer machine Co., Ltd

    Standard:营业执照3

    Number:320483000201711170090

    Issue Date:2017-11-17

    Expiry Date:2047-11-17

    Scope/Range:减速机,塑料制品(除医用塑料制品),机械零部件,关风机,阀门的制造,加工,销售;自营和代理各类商品及技术的进出口业务,但国家限定企业经营或禁止进出口的商品及技术除外。(依法须经批准的项目,经相关部门批准后方可开展经营活动)

    Issued By:常州市武进区行政审批局

Contact Details
Changzhou speed reducer machine Co., Ltd

Contact Person: Mr. Jack

Tel: +8613861154901

Fax: 86-519-86354070

Send your inquiry directly to us (0 / 3000)